In refractory metals, molybdenum has good thermal conductivity, electrical conductivity and low thermal expansion coefficient, has high strength under high temperature (1100~1650℃). Compared with tungsten, it can be easily processed, thus widely used in high temperature furnace, electron tubes, electric light source, metal cutting machine tools manufacturing sector and aerospace industry.

Molybdenum can bear molten glass etching, the oxide will not pollute glass.

Molybdenum materials are used for heating electrode in glass industry, and the sputtering target for solar cells and flat panel displays.

Brand: FMo-1, FMo-2

Mo Content: FMo-1 Mo≥99.9% FMo-2 Mo≥99%

Appearance: pure grey powder

Product Specification:

Fisher particle sizeμｍ	≤2	>2-3	>3-4
O content, %, less than	0.35	0.25	0.2

 

Product Impurity Content:

Brand	Impurity content，%≤
	Pb	Bi	Sn	Sb	Cd	Fe	Ni
Fmo-1	0.0001	0.0001	0.0001	0.001	0.0001	0.005	0.002
Fmo-2	0.001	0.001	0.001	0.001	0.001	0.030	0.005
Brand	impurity content, %≤
	Cu	Al	Si	Ca	Mg	P	C
Fmo-1	0.001	0.002	0.003	0.002	0.002	0.001	0.010
Fmo-2	0.003	0.005	0.010	0.004	0.005	0.005	0.020

Application:

− Refractory parts of industrial high temperature furnace

− Electric light source and electric vacuum part

− Sputtering target for flat panel and solar energy

Production Process

We use high quality molybdenum powder, processed into the slab with good performance, to produce molybdenum plate and sheet products through special rolling process, with good processing performance and surface roughness.

Product Specification

       0.05~50.0mm(thickness) × 50~600mm(width) × 100~3000mm

Chemical Composition

Molybdenum Content	Sum of other elements	Content of each element
≥99.95%	≤0.05%	≤0.01%

Application

− Semiconductor ion implantation parts

− Electric light source and electric vacuum part

− Refractory parts of industrial high temperature furnace

− Molybdenum glass melting electrode and water jacket

− Used as electrodes in the rare earth industry

Product Specification

Variety	Forging rod	Straightening rod (after drawing)	Polished rod and customized products
Size	Ф2.4~150mm	Ф0.8~3.2mm

 

Application

− Used for cutting wire

− Electric light source and electric vacuum part

− Refractory parts of industrial high temperature furnace

− High temperature spraying to improve the wear resistance of automotive and other mechanical parts.

We supply high temperature molybdenum wire.

Appearance: The surface of the molybdenum wire is coated with graphite emulsion, which is uniform in black.

Product Specification

Diameter and Tolerance of Molybdenum Wires:

Nominal diameter(μm)	200mmwire segment weight	200mmwire segment weight tolerance(％)		Diameter tolerance(％)
		ⅠGrade	Ⅱ Grade	Ⅰ Grade	Ⅱ Grade
20≤d<30	0.65~1.47	±2.5	±3	－	－
30≤d<40	>1.47~2.61	±2.0	±3	－	－
40≤d<100	>2.61~16.33	±1.5	±3	－	－
100≤d<400	>16.33~256.2	±1.5	±4	－	－
400≤d<600	－	－	－	±1.5	±2.5
600≤d<3200	－	－	－	±1.0	±2.0

 

➢ Having inherited the 60 years of experience of the Central Iron and Steel Research Institute, our company is equipped with advanced technology for the preparation of refractory metal materials.

➢ Has the largest tungsten and molybdenum advanced production line in China, to meet the customers’ requirements.

➢ We never stop footsteps of Technical innovation. As a state-owned company, we take responsibility of leading the development of domestic refractory metal technology.

➢ Having passed the certification of ISO9001, ISO14001 and OHSAS18001, the company is qualified to provide you with high quality products.